cocos2d-x开发:整合apachehttp,用于自己检索多项目svn文件

本来我的项目都是放在自己的虚拟机svn仓库中，随着仓库越来越多,有的时候需要去查看项目文件.check out到本地之后,挨个查看也是可以的,可是check out也是需要时间的,就想起了apache提供的对svn http的支持,所以就花了一点时间配置了一下.配置的方法很简单,下面是我的apache配置文件.

 1 # dav_svn.conf - Example Subversion/Apache configuration
 2 #
 3 # For details and further options see the Apache user manual and
 4 # the Subversion book.
 5 #
 6 # NOTE: for a setup with multiple vhosts, you will want to do this
 7 # configuration in /etc/apache2/sites-available/*, not here.
 8 
 9 # <Location URL> ... </Location>
10 # URL controls how the repository appears to the outside world.
11 # In this example clients access the repository as http://hostname/svn/
12 # Note, a literal /svn should NOT exist in your document root.
13 <Location /svn>
14 
15   # Uncomment this to enable the repository
16   DAV svn
17 
18   # Set this to the path to your repository
19   #SVNPath /svn
20   # Alternatively, use SVNParentPath if you have multiple repositories under
21   # under a single directory (/var/lib/svn/repo1, /var/lib/svn/repo2, ...).
22   # You need either SVNPath and SVNParentPath, but not both.
23   SVNParentPath /SVNRepos
24   SVNListParentPath on
25   # Access control is done at 3 levels: (1) Apache authentication, via
26   # any of several methods.  A "Basic Auth" section is commented out
27   # below.  (2) Apache <Limit> and <LimitExcept>, also commented out
28   # below.  (3) mod_authz_svn is a svn-specific authorization module
29   # which offers fine-grained read/write access control for paths
30   # within a repository.  (The first two layers are coarse-grained; you
31   # can only enable/disable access to an entire repository.)  Note that
32   # mod_authz_svn is noticeably slower than the other two layers, so if
33   # you don't need the fine-grained control, don't configure it.
34 
35   # Basic Authentication is repository-wide.  It is not secure unless
36   # you are using https.  See the 'htpasswd' command to create and
37   # manage the password file - and the documentation for the
38   # 'auth_basic' and 'authn_file' modules, which you will need for this
39   # (enable them with 'a2enmod').
40   AuthType Basic
41   AuthName "Subversion Repository"
42   AuthzSVNAccessFile /SVNRepos/auth
43   AuthUserFile /SVNRepos/passwd  
44   #To enable authorization via mod_authz_svn (enable that module separately):
45   #<IfModule mod_authz_svn.c>
46    #AuthzSVNAccessFile /SVNRepos/auth
47   #</IfModule>
48 
49   # The following three lines allow anonymous read, but make
50   # committers authenticate themselves.  It requires the 'authz_user'
51   # module (enable it with 'a2enmod').
52   #<LimitExcept GET PROPFIND OPTIONS REPORT>
53    Require valid-user
54   #</LimitExcept> 
55 
56 </Location>

由于是本地,只有我自己会浏览仓库,所以权限方面本来是不需要做的,可是我还是做了一下.主要是提供了auth和passwd文件,配置的方法和svn仓库中conf下面的auth,passwd方法一样的。

1 auth
2 
3 [groups]
4 admin = xiaoyan
5 
6 [/]  # 拥有所有控制权
7 * =  # 匿名用户没有任何控制权(不可以r/w)
8 @admin = rw

asswd文件直接使用htpasswd生成就好了. 用户对应就是auth中的用户.这样之后,我就可以在浏览器中随意浏览自己仓库.注意的是,处理编码方面的问题,windows下面的浏览器编码自己设置一下,使用utf8,这样自己写的中文笔记文档就不会乱码了。